Frequently Asked Questions

44 answers about radon mitigation in Fort Collins

Straight answers, specific to Fort Collins homes. Click any question for the full long-form explanation.

Northern Colorado Radon Pros trust signals

  1. How much does radon mitigation cost in Fort Collins?

    Most Fort Collins-area basement and slab homes land between $1,400 and $2,600 for an active system. Crawl space membrane systems run $2,000 to $3,800, and activating a builder's passive pipe runs $800 to $1,300. A professional test is $150 to $275.

  2. What does a radon test cost here?

    A professional short-term test runs $150 to $275 in the Fort Collins area. Hardware-store charcoal kits cost $15 to $30 plus lab fees, and CDPHE's radon program page explains how Colorado residents can find a test kit.

  3. What does it cost to activate a passive radon pipe?

    Adding a fan, gauge, and proper discharge to a correctly run builder rough-in costs $800 to $1,300 here, the least expensive full fix on our price list. The catch: the rough-in has to have been run correctly, and not all were.

  4. What does a radon system cost to run each year?

    The fan draws roughly 20 to 90 watts and runs continuously, which at Fort Collins Utilities or Xcel residential rates works out to a few dollars a month. There is also a modest heat cost, since the system exhausts some conditioned air.

  5. Does homeowners insurance cover radon mitigation?

    Almost never. Policies cover sudden, accidental damage, and radon is a standing condition of the soil, present before the house was built. Northern Colorado owners pay directly or negotiate the cost inside a home sale.

  6. Who pays for radon mitigation in a Colorado home sale?

    Whoever the negotiation says. Colorado does not assign the cost to either side, so a high test result becomes an inspection item: sellers may fix it, credit it, or decline, and buyers decide what that answer is worth.

  7. How long does a radon mitigation install take?

    Most single-suction-point basement and slab installs finish in one working day. Tri-levels, walkouts needing two suction points, and crawl space membrane jobs can take two. The verification retest then runs at least 48 hours.

  8. How do I check a Colorado radon license?

    Look the person or company up through DORA's license search, linked from the Office of Radon Professionals page at dpo.colorado.gov/RadonProfessionals. An active mitigation or measurement license should match the name on your quote.

  9. How do I know the new system actually worked?

    By measurement, not by the hum. Every install here ends with a verification retest of at least 48 hours, run after the system stabilizes, placed where the original test sat. The written result is the proof, and it goes in your records.

  10. Our closing is three weeks out and the test came back high. Is there time?

    Usually, yes. Assessment and a written quote can happen within days, most installs take one day, and a 48-hour verification test follows. Three weeks is comfortable; ten days is tight but workable when everyone moves promptly.

  11. Can I install my own radon system in Colorado?

    On your own home, yes; Colorado's licensing law governs people doing radon work for compensation. The hard parts are diagnostics, fan and discharge placement under ANSI/AARST rules, and proving the result afterward.

  12. Can I test my own home with a kit?

    Yes, and for a first look at your own house it is money well spent. CDPHE's radon program page explains where Colorado residents can find kits, and hardware stores carry charcoal kits for $15 to $30 plus lab fees. For a sale, use a licensed tester.

  13. When is the best time to test for radon in northern Colorado?

    The heating season, roughly November through March, when the house stays closed and warm indoor air rising pulls hardest on the soil. A winter number is the strongest basis for a decision; a summer number tends to read low.

  14. How often should I retest my home?

    Every two years as a baseline, and sooner after foundation or HVAC work, a new sump, a basement finish, a fan replacement, or when someone starts sleeping or working on the lowest level. Homes with systems retest on the same clock.

  15. Should a brand-new home in Timnath or Windsor be tested?

    Yes, soon after move-in, even with a builder's passive rough-in. Tight new envelopes concentrate what gets in, and passive pipes reduce radon without reliably finishing the job. A high result usually just means the pipe needs a fan.

  16. We are finishing our basement. Should radon come first?

    Test before you frame. A pre-finish test costs little, and a suction point, pipe chase, and sealing scope are all far cheaper to install before drywall than behind it. Retest after the finish either way, since the project changes the air.

  17. Why are radon levels so high around Fort Collins?

    Geology. The Front Range is uranium-bearing granite, the basin beside it is filled with sediments shed from that granite plus uranium-rich Cretaceous shales, and homes sit right on top. Larimer County's average is 7.8 pCi/L against 1.3 nationally.

  18. How dangerous is radon, really?

    The EPA ties about 21,000 US lung cancer deaths a year to radon exposure, making it the leading cause among people who have never smoked. The risk builds with concentration and years of exposure, not from any single day.

  19. Does smoking change the radon math?

    Substantially. Radon and smoking multiply rather than add: EPA risk tables show a smoker's lifetime lung cancer risk from the same radon level runs several times a never-smoker's. A smoker's household has the most to gain from fixing a high house.

  20. Is a basement bedroom safe for my kids?

    It is exactly the room to test. Basements and lower tri-level wings usually carry the highest readings in the house, and risk builds over years, which children in a bedroom have ahead of them. Test the room itself, then decide from the number.

  21. Would I notice if my home had high radon?

    No. Radon has no smell, color, or taste, causes no short-term symptoms, and does not trip any household alarm. A house at 40 pCi/L feels identical to one at 0.4. The measurement is the only information there is.

  22. My test came back above 4 pCi/L. How urgent is this?

    Fix the house this season, not this afternoon. The EPA recommends mitigating at 4 pCi/L or higher, and risk accumulates over years, so a few weeks of scheduling changes nothing while skipping the fix entirely changes a lot.

  23. How does radon get into a house?

    Through the foundation, riding soil air. A heated house runs at slightly lower pressure than the ground, so it draws soil gas in through slab cracks, the floor-wall joint, sump pits, utility penetrations, crawl space dirt, and porous foundation walls.

  24. What is it about Front Range geology specifically?

    Uranium in the rock. The Front Range's Precambrian granites carry elevated uranium, the piedmont sediments were shed from those granites, and uraniferous Cretaceous shales line the basin edge. The USGS documented all three for this region.

  25. How do you test and mitigate a tri-level home?

    Level by level. A tri-level stacks a basement, a mid-grade slab wing, and sometimes a crawl under one roof, and each foundation touches the soil separately, so testing covers each lowest lived-in level and mitigation may need more than one suction point.

  26. Do walkout basements have radon problems too?

    Yes, and their own design quirks. The daylight wall breaks up the sub-slab air path and the slab often steps with the grade, so suction placement matters more than in a conventional basement. Walkouts test high across this market's sloped lots.

  27. How is a crawl space mitigated?

    With a sealed membrane and a fan under it: heavy polyethylene laid over the soil, seams lapped and sealed, edges fastened to walls and piers, and the fan depressurizing the space beneath the plastic. It is a built slab made of membrane.

  28. What happens to my sump pit when a system goes in?

    It gets sealed, serviceably. The pit connects to drain tile under the whole slab, making an open sump one of the largest radon entries in the house. A proper cover is airtight, clear or ported so you can see the pump, and removable for service.

  29. My new build has a radon pipe. Why did it still test high?

    Because a passive pipe has no fan. It relies on natural buoyancy, which the EPA rates well below active systems, and it only helps at all when the rough-in was run correctly. High tests in roughed-in Timnath and Windsor homes are routine.

  30. What is the U-shaped gauge on my radon pipe telling me?

    Whether the fan is pulling. The two liquid columns sit at different heights while the system holds suction; the installer marks the startup reading. Columns drifting back toward level mean lost suction, and dead level means the fan has stopped.

  31. Why is my radon fan getting loud?

    A hum or whine growing over time usually means worn bearings nearing failure, a rattle points to loose mounts or couplings, and a gurgle means condensation pooling in the pipe. None is dangerous; all deserve attention before the fan quits.

  32. Why are my winter radon readings higher than summer?

    Because winter is when the house pulls hardest on the soil. Heating drives the stack effect, closed windows stop dilution, and northern Colorado's inversion stretches keep houses sealed for days. Winter readings are the honest ones.

  33. Can more ventilation fix a radon problem?

    It dilutes rather than fixes. HRVs and added ventilation lower concentrations somewhat, at an ongoing heating cost, and the EPA treats them as limited, supplementary measures. Sub-slab suction remains the fix that addresses the source.

  34. Can my well water add radon to the house?

    It can. Water from wells drilled in uranium-bearing rock carries dissolved radon that releases indoors when water runs, at showers and faucets. Soil gas is almost always the bigger source, so test the air first, then the water if the air runs high.

  35. My mitigated house is testing high again. What changed?

    Something specific, usually: a fan quietly failing, a sump lid left unsealed after pump service, a membrane seam letting go, or a renovation that opened new pathways. The gauge plus a process of elimination finds it.

  36. What standard governs a radon install in Colorado?

    ANSI/AARST SGM-SF-2023, the national soil gas mitigation standard for single-family homes, performed under Colorado's DORA license. The standard sets fan placement, discharge rules, labeling, gauges, and how systems are diagnosed and documented.

  37. I rent near CSU. Can I test my rental, and what if it is high?

    Test away: a $20 kit works in a rental, and basement and garden-level units near campus are exactly the units worth testing. If the result is high, send the written report to your landlord; mitigation belongs to the owner, not the tenant.

  38. What should northern Colorado landlords know about radon?

    That ground-contact units carry the exposure, that tenants can and do test with kits, and that a $20 test per unit is the cheapest risk management in the building. Mitigating a rental works like any home.

  39. My neighbor tested low. Does that mean my house is fine?

    No. Side-by-side houses routinely read far apart, because entry depends on each foundation's cracks, sump, soil pocket, and pressure balance. The neighbor's test answered the neighbor's question. Yours costs $20 to answer.

  40. Do condos and townhomes in this area need testing?

    Ground-contact units do: anything with a basement, a slab on grade, or rooms over a crawl. Upper-floor units read low almost always. Mitigation in attached housing involves the HOA or owner, since systems touch shared structure.

  41. Does a radon system help or hurt when I sell?

    Helps, with paperwork. A labeled system plus a recent low retest answers the radon question before the buyer's inspector raises it. What reads badly is not the pipe; it is a system nobody can document or a visible shortcut like a basement fan.

  42. We are on acreage east of I-25, well and septic. What is different?

    Three things: your water can carry radon as well as your soil, your septic lines are slab penetrations that need careful sealing, and your well house and outbuildings are not the issue, the house is. Test the house air first.

  43. What does it mean that Larimer and Weld are EPA Zone 1?

    Zone 1 is the EPA's highest-potential tier: counties whose predicted average indoor screening level exceeds 4 pCi/L. It describes the odds across the county, not any single house, and the EPA itself says every home should test regardless of zone.

  44. What does pCi/L actually mean?

    Picocuries per liter: a count of radioactive decays happening each second in a liter of air, scaled to a convenient unit. The EPA action level is 4.0 pCi/L; US outdoor air averages about 0.4 and indoor air about 1.3.

Ready to get started?

About half of Fort Collins homes test at or above the EPA action level, and Larimer County averages six times the national figure. Mon-Sat 8am-6pm.

Call (970) 426-0858Text us

Prefer to text? Open your texting app