FAQ

We are finishing our basement. Should radon come first?

Direct answer

Test before you frame. A pre-finish test costs little, and a suction point, pipe chase, and sealing scope are all far cheaper to install before drywall than behind it. Retest after the finish either way, since the project changes the air.

More detail

A basement finish changes the radon picture three ways at once. It converts the highest-reading level of the house into bedrooms and family rooms where people spend hours. It covers the slab and walls, hiding the cracks and joints a mitigation scope would seal and making future pipe routing a drywall-repair project. And the finish itself, plus the furnace balancing that follows, shifts how the house breathes. So the cheap sequence is: test now, mitigate now if the number says so, rough in the pipe route even if the number is borderline, then finish. If the basement is already finished and you are reading this late, nothing is lost but convenience: systems route through closets, utility rooms, and exterior walls every week. The post on finishing a Fort Collins basement, test first walks the decision in order.

Authoritative sources

Ready to get started?

About half of Fort Collins homes test at or above the EPA action level, and Larimer County averages six times the national figure. Mon-Sat 8am-6pm.

Call (970) 426-0858Text us

Prefer to text? Open your texting app